software:backup_stick
Differences
This shows you the differences between two versions of the page.
| Next revision | Previous revision | ||
| software:backup_stick [2026/10/08 19:53] – created - external edit 127.0.0.1 | software:backup_stick [2026/11/02 11:21] (current) – external edit 127.0.0.1 | ||
|---|---|---|---|
| Line 2: | Line 2: | ||
| ===== Back up your head unit before you change anything ===== | ===== Back up your head unit before you change anything ===== | ||
| - | The backup stick makes a complete backup of your head unit onto a USB stick — before you try ADC or anything else. With that backup we can build a firmware stick for exactly **your** original version if something goes wrong later. That matters most if your head unit does **not** have firmware 0051: for 0051 there' | + | The backup stick makes a complete backup of your head unit and your T-Box onto a USB stick — before you try ADC or anything else. With that backup we can build a firmware stick for exactly **your** original version if something goes wrong later. That matters most if your head unit does **not** have firmware 0051: for 0051 there' |
| - | **Status: | + | **Status: |
| ===== What it does ===== | ===== What it does ===== | ||
| - | * It installs two small apps: the **Connect app** and **ADC Backup**. Nothing else in the system is changed — that's why it runs on every firmware version, not just 0051. | + | * It installs two small apps: the **Connect app** and **ADC Backup**. Nothing else in the system is changed — that's why it should run on every firmware version, not just 0051. |
| - | * Then it copies all 11 partitions of the head unit (boot, recovery, system, vendor, logo and so on, about 1.8 GB together) onto the stick, with checksums and a list of what's inside. The head unit is only **read**; the only thing written to is the stick. Which partitions those are is under [[: | + | * It copies all 11 partitions of the head unit (boot, recovery, system, vendor, logo and so on, about 1.3 GB together) onto the stick, with checksums and a list of what's inside. The head unit is only **read**; the only thing written to is the stick. Which partitions those are is under [[: |
| - | * Plug the stick in again afterwards | + | * Then the head unit restarts — **the stick stays in** — and ADC Backup |
| + | * **New in 0.15:** Connect app 1.9.41. If you install ADC through its window afterwards, the installation runs straight from the stick and the road map comes along — after 0.14 it did not that way (then install ADC with the factory reset, see [[: | ||
| + | * **New in 0.14:** the Connect app stays on the head unit after the backup. On a car without ADC it now leaves Bluetooth, the hotspot and the original CarPlay alone and only looks after USB sticks. Before, it took them over — which stopped an external wireless CarPlay adapter from working. If an older backup stick switched the original CarPlay off, it switches it back on once. | ||
| + | * **New in 0.13:** whether your head unit's firmware comes along is now decided by **two** numbers: the AP version and the firmware number (operating system). If either is new to us, the stick packs the firmware — before, only the AP version counted. | ||
| + | * At the end ADC Backup writes a small **report** on the firmware versions of your head unit and T-Box onto the stick ('' | ||
| ===== Before you start ===== | ===== Before you start ===== | ||
| - | * An empty USB stick formatted **FAT32** | + | * An empty USB stick formatted **FAT32**, **at least 8 GB**. The head unit backup needs about 1.3 GB, the T-Box one with its drive recordings can reach 1.5 GB on a car that has driven a lot — 8 GB keeps you on the safe side. The head unit can't read exFAT sticks. |
| - | * On a car without ADC this only works via a **factory reset**: paired phones, Wi-Fi networks and settings are deleted. The firmware itself — exactly what we need for your firmware stick — stays on the unit and ends up on the stick. | + | * On a car without ADC (Aiways Drivers Community firmware) |
| - | ===== How it works ===== | + | ===== Download ===== |
| + | |||
| + | ^ File ^ Size ^ SHA-256 ^ | ||
| + | | {{: | ||
| + | |||
| + | Unzip the download and copy the **four files** — '' | ||
| + | |||
| + | ===== How to make a backup | ||
| - Switch the car on and plug the stick into the **USB port in the centre console**. | - Switch the car on and plug the stick into the **USB port in the centre console**. | ||
| - Open **Settings › About › Factory Reset** and confirm. | - Open **Settings › About › Factory Reset** and confirm. | ||
| - | - The head unit restarts, installs the two apps and writes the backup onto the stick. That takes longer than a normal installation — 1.8 GB have to be copied first. | + | - The head unit restarts |
| - | - When it's finished, | + | - Then you see **BACKUP COMPLETE — Restarting, leave the stick in!!!** The head unit restarts; the first start after the reset takes a bit longer than usual. |
| - | - **Plug the stick in again:** now the Connect app backs up the T-Box. | + | - **ADC Backup** opens by itself and now backs up the T-Box. |
| + | |||
| + | Afterwards everything is on the stick in the folder '' | ||
| + | |||
| + | **Good to know:** the stick disarms itself on the way: the three start files move into the folder '' | ||
| - | Afterwards everything is on the stick in the folder '' | + | ===== Sending |
| - | Sounds complicated? It is, a bit. But it beats a few weeks without a head unit. | + | - Open [[https:// |
| + | - If we're missing one of them, the same page shows a second field right below it for the firmware file '' | ||
| + | - Don't send the folder '' | ||
software/backup_stick.1791482036.txt.gz · Last modified: by 127.0.0.1