cdc_ether link (usb0) as a DHCP client.cloud → TBox → CAN, never touching the sleeping head unit.
Reached on the usb0 peer link. Open ports found: 21 (FTP, authentication required —
anonymous refused), 53 (DNS/dnsmasq), 50000 (a binary telematics protocol).
The head-unit ↔ TBox link on port 50000 carries only telephony / eCall / B-call signalling (call state, network type, signal strength). It carries no vehicle control. Remote climate/charge logic lives inside the TBox firmware, on the internal CAN bus — which is exactly why it keeps working while the head unit sleeps.
Practical gotcha: the TBox link collides on the same 192.168.1.x subnet as a typical home
router, which can break reply routing. Put the home network on a different subnet to reach the car
reliably over Wi-Fi.