User Tools

Site Tools


software:versions

Head unit versions

Which software your head unit runs is shown under Settings › About: tap the version entry about 5 times, then three numbers appear. Only all three together tell you what fits your car.

shown as what it is
AP version the head unit's apps — this is your app build (e.g. _060).
System version the operating system: _060 means firmware 0051, _052 means firmware 0046.
MCU version the head unit's microcontroller. It talks to the rest of the car (CAN bus). Our sticks never change it.

Why the MCU version matters

Apps and MCU must speak the same “language”. In app builds 030, 052 and 060 it is the same; with 102, 104 and 108 the manufacturer changed it (checked in the apps' code). If 102, 104 or 108 runs on an MCU of the older language, our analysis says vehicle data such as doors, gear or range would no longer arrive, and some commands would be misunderstood. We have not observed this in a car. So: never install an AP version that speaks a different language than your MCU — i.e. no 102, 104 or 108 on an MCU version _030, _052 or _060.

What left the factory together

From the manufacturer's factory records (version combinations only, no vehicle data). They show the factory state — later dealer updates are not included. Look up your MCU version in the first column.

MCU version ends in AP version from the factory System version Firmware newest AP version speaking the same language ¹
_010 010 _010 ? ?
_012 015 _012 ? ?
_014 017 _014 ? ?
_020 020 _020 0016 ?
_030 001, 030, 048 _030 0024 060
_052 052 _052 0046 060
_060 060 _060 0051 060
_070 076 _060 0051 probably 104 ²
_073 086 (rarely 076) _060 0051 probably 104 ²

¹ Derived from the apps' code, not tested in any car. ² 104 did not leave the factory; it came later with a manufacturer update (vehicle version 1.9.2). Which MCU version those cars have, we are checking right now.

What you can do with it

  • Stock firmware sticks exist for AP versions 052, 060, 102, 104 and 108: Stock Firmware. Take the stick of your current AP version. Switching to another AP version of the same language (e.g. from 052 to 060) works with the stick of the new version, deletes all data and leaves the MCU as it is — nobody has tried that in a car yet.
  • ADC runs on AP versions 052, 060, 102, 104 and 108 with firmware 0051: ADC.
  • If your combination is missing or you have 102, 104 or 108: send us your report with the backup stick — or write us your three numbers.
software/versions.txt · Last modified: by 127.0.0.1